Product Details
KUSUM MECO Model 9999 4 Digit True RMS Auto-ranging AC/DC Clam meter with INRUSH current Measurement..
Sold By :
Delivery duration : * 8 to 10 Days
Quantity:
Return Policy:
Thank you for purchasing our products/services. We value your trust and assure you of the best product/services at all times. As our customer, when you are buying our product or service, you agree to our refund policy. Once you have made a purchase on our platform. View details
Technical Details:
Sensing: TRUE RMS
Jaw Opening Size: 46.5 mm
Display : 4 digits 9999 counts large LCD display
Display Size: 27 mm x 55 mm
Crest Factor: Less than equal to 3
Pollution Degree: 2 Low Battery: The “ ” is displayed when the battery Voltage drops below the operating level.
Over range indication: “O.L” indicated í Measurement Rate: 2 times per second, nominal Operating Temperature : 0°C to 50°C,at <70% R.H.
Storage Temperature: -20°C to 60°C,at <80% R.H. With the battery removed from the meter.
Accuracy stated at ambient temperature 18°C to 28°C(65°F to 82°F), <70% R.H.
Temperature Coefficient: 10% of applicable accuracy per °C(5% per °F) outside the range of 18 to 28°C (65°F to 82°F)
Altitude: 2000m
Power Supply: 9V battery
Dimension : 250(H) X 100(W) X 46(D) mm
Weight: Approx. 425 gm (battery included)
Feature:
High Accuracy, Digital Reading
ACA/DCA measurement up to 999.9A
Overload Protection on all ranges Diode & Continuity Test
Low Battery Indication
Instant Continuity Buzzer
Data Hold, Peak Hold & Max Hold Functions. Relative Zero Mode function.
Accessories:
Test leads, Carrying Case, Battery installed, User's Manual & Banana plug K-Type Thermocouple, Thermocouple Adaptor
All input are protected to EN61010-1, CAT III 600V. ? Withstand Voltage : 6000V
SAFETY INFORMATION
The following safety information must be observed to ensure maximum personal safety during the operation of this meter.
1. Do not use the meter if the meter or test leads look damaged, or if you suspect that the meter is not operating properly.
2. This meter is not recommended for high voltage industrial use, for example, not for measurements of 440V AC or 600V AC industrial power mains. The unit is intended for use with low energy circuits to 600V AC/DC or high energy circuit to 250V AC or DC.
3. Turn off power to the circuit under test before cutting, unsoldering, or breaking the circuit. Small amounts of current can be dangerous.
4. Use caution when working above 60V DC or 30V AC rms. Such voltages pose a shock hazard.
5. When using the probes, keep your fingers behind the finger guards on the probes.
6. Measuring voltage which exceeds the limits of the Clampmeter may damage the meter and expose the operator to a shock hazard. Always recognize the meter voltage limits as stated on the front of the meter.
WARRANTY:6MONTH
